wealthkvm.blogg.se

Pc chips m811 motherboard manual
Pc chips m811 motherboard manual






pc chips m811 motherboard manual

What is meant by CMOS checksum error and how would this situation be handled? No matter which tool is used, the clip must be aligned with the center socket lugs for the clip to fit.Īfter installing the heatsink, the next step is to connect the fan.Related FAQ: .hardware.* Frequently Asked Questions (FAQ) Part 1/5 Keep the clip at the same level as the lug and press slightly inward so that the clip is hooked onto the center lug on the top end of the socket. To install this clip, push firmly only on the end of the clip.įigure 17 shows the clip being locked securely on the center lug. Notice how the heatsink rests on the rubber pads and not on the processor itself.įigure 15 shows the heatsink clip being installed on the center lug at the top of the processor socket. The heatsink must be placed on the processor with the short end of the clip attached to the center lug at the bottom of the socket.įigure 13 shows a side view of the heatsink with the clip installed on the center socket lug at the bottom of the socket.

pc chips m811 motherboard manual pc chips m811 motherboard manual

Side View of Heatsink and Clip on an Socket A AMD Processor.įigure 12 shows the first step in the installation of the heatsink. The compound must be applied evenly to the surface of the heatsink so it can (basically) melt and fill any microscopic voids in the surfaces of the processor and heatsink with a thermally conductive material. Notice that the assemblies vary in size, fin density, and clip design.įigure 9 shows the proper way to remove the plastic film from the phase-change thermally conductive compound. With the processor now properly installed, the heatsink and fan assembly can be attached. Notice how the pin array at the two upper corners in the picture are angled and there are no pins in either top corner. Note that the release lever on the side of the socket is down. This is usually the easiest way to install the processor and heatsink. Note: In this guide, the AMD Athlon or AMD Duron processor is installed in Socket A of the motherboard before installing the motherboard and processor assembly into the system chassis. Pc Chips M811 Motherboard Install The AMDįor the latest information on the components that have been tested by AMD and are recommended for best performance, always check the AMD web site.








Pc chips m811 motherboard manual